Nick Bessette Reviews The Pioneer4You IPv3 Full Review
Here it is, the much anticipated Pioneer4You IPv3 Full Review! This beauty of a box came to me directly from the manufacturer, Pioneer4You, makers of the extremely popular IPV2. Fairly unassuming from the outside, the power comes from two 18650 batteries and a SX330 150w chip. Use caution and always build to the best of your abilities, but when you get that one build that works just right, you can really open ‘er up.
iPV3-Li 165 Watt MOD with Temp Control by Pioneer4you Greenleaf
The IPV3-LI V2 Box Mod by Pioneer4You is the newest version and most updated version of the famous IPV3 Mod. The Pioneer4You IPV3-LI V2 Box Mod packs a major punch, allowing you to go up to 165 watts and fire atomizers as low as .10 ohms! Not to mention the new IPV3-LI V2 Mod features Temperature Control and a Magnetic back cover allowing you to simply change your batteries with no hassle. The Pioneer4You IPV3-LI V2 Mod is controlled and upgradeable box mod with a 510 atomizer connector, it will come out of the box with 165W and will be upgradeable to 200W. The IPV3’s Billet Aluminum body features room to use (2) 18650 Flat Top Batteries, which will increase your voltage times two.
The IPV3-LI V2 box mod allows you to control wattage, for better consistency and repeatability. The Pioneer4You IPV3-LI is equipped with the new SX330-V3SL chip, the chip features Temp Control and gives you the ability to upgrade your firmware to increase the IPV3-LI’s watts for future developments. The Pioneer4You IPV3-LI V2 Mod features a OLED display screen so you can see your IPV’s wattage, Temperature Control, voltage, battery life, etc. Don’t miss out on the IPV3-LI V2, this is the ultimate box mod!
This is an advanced mod for advanced users only. Please be aware that this mod requires knowledge of battery safety and technical know-how to work properly.
Features and Specs:
- Dimensions: 4-1/8″L x 2-1/2″W x 7/8″
- 510 Threaded
- Wattage: 7w – 165w
- Atomizer Resistance: 0.10ohm – 3.0ohm
- Improved Firing Button
- Aluminum Body
- Yihi temperature control chipset
- Redesigned internals
- Takes two 18650 batteries in series (not included)
- Yihi SX330-V3Si Upgradeable chip
- 165 watts upgradeable to 200 watts with a later firmware update
- Touch sensor functionality has returned
- No direct charging capability
Please note: Temperature control requires the use of nickel coils.
Fight for Your Right to Vape!
Vape on!
https://www.facebook.com/dailyvapetv
https://twitter.com/dailyvapetv
