A Cold Open Video

Innokin has sent out review products for the iTaste VV 4 and the new MVP. Today we take a look at the VV4, with a written review to follow early next week (after a few days of use).

The iTaste VV 4 comes in two different sizes, although they are both spec’d out the same. 15w maximum power, voltage range of 3-6v, and all the APV features we’ve become accustomed to this year. Improvements seems to be, at this early date anyway, the LED display, the sleeker look and feel, and the higher wattage, among others.

Watch the video, comment and subscribe over at the Youtube URL, for your chance to win a new Aspire Atlantis and SubΩ battery combo. 

 

The Primary Features of The iTaste VV4 

Battery Level Indicator: 
The iTaste VV4 battery capacity is displayed via green, yellow and red LED lights.
Green  = Almost fully Charged. When the iTaste VV4 is fully recharged the LED light will power off.
Yellow = Half Power.
Red  = Low Power. Charge the VV4.

Variable Voltage: 
Voltage can be adjusted from 3.0 – 6.0 volts in .1 volt increments.

Variable Wattage: 
Wattage can be adjusted from 6.0 – 15.0 Watts in .5 watts increments.

Large battery capacity: 
The iTaste VV4 has a built-in 1000 mAh polymer Li-Ion rechargeable battery.

ON/OFF battery switch: 
Press the power button three times in rapid succession to turn on the iTaste VV4. Once the iTaste VV4 is On hold down the power button to activate the atomizer and vape. When the iTaste VV4 is not in use, press the power button three times in succession to power off the iTaste VV4 Advanced Personal Vaporizer. Always power off the iTaste VV4 Advanced Personal Vaporizer when it is not being used, or when it is going to be stored in a pocket, bag or purse.

SAFETY: 

10 second cutoff: 
If the activation button is held for 10 seconds or longer the iTaste VV4 Advanced Personal Vaporizer will stop firing until the button is released and pressed again.

Low Voltage Warning: 
The Red LED and Battery bar will continue blinking when the battery capacity is lower than 3.3V and the iTaste VV4 Advanced Personal Vaporizer will power off automatically.

Short Circuit/Atomizer Protection: 
Short Circuit/Atomizer Protection protects the iTaste VV4 Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions.
The iTaste VV 4 features automatic real-time atomizer Ohms detection. If the resistance of the atomizer is lower than 0.8 the Ohms bar will blink.
If there is a short circuit the VV4 screen will display the following and the LED light will power off.

Over-Discharge Protection:
The iTaste VV4 Advanced Personal Vaporizer monitors the battery voltage and will automatically power off when the battery is discharged.

High compatibility 510/ego connector: 
Threads are compatible with the following clearomizers: iClear16, iClear16B, iClear16D, iClear30, iClear30B, iClear30s, iClearX.I. Gladius and other standard 510 threading.
Technical Specifications: 

Variable Voltage: 
Voltage can be adjusted from 3.0 – 6.0 volts in .1 volt increments.

Variable Wattage: 
Wattage can be adjusted from 6.0 – 15.0 Watts in .5 watts increments.

Standby current: 50uA max

Maximum output current4.0A

Charging: Micro USB DC5.0V/500mA

Short Circuit Protection: 0.8 Ohm