Last Updated on April 5, 2018 by Team Spinfuel

The Geek Vape Blade comes in 3 color schemes at Element Vape; Matte Black, Crystal Sand, and Starry Night. After looking at all three, I decided that I would review the Starry Night model. Would Vincent Van Gogh be proud, or offended? I pretty sure which way he would have went, but I couldn’t resist. This Preview is based on my first hour of the Geek Vape Blade, Van Gogh Edition, er, I mean Starry Night edition.

Geek Vape Blade 235W TC Starter Kit Preview

About the Geek Vape Blade

“ELEMENT

The Geek Vape Blade 235W TC Starter Kit is a beautiful, super-lightweight Vape Mod using the AS Chipsetand includes the Aero Sub-Ohm Tank. The vape mod and vape tank are perfectly proportioned to each other and my initial performance with the Aero Tank suggests that at this point, I’d say the Kit version is the best way to go. For an extra $10 you’ll get a tank worthy of the Geek Vape name. For more on the specs of the Aero tank, see below.

 

The Blade 235W TC Box Mod a visual treat, no matter which color scheme you decide to buy into. And although the Starry Night edition doesn’t really look much like the painting of the same name, you’ll think of the painting the instant you see it. The artist behind the designs did a good job using certain visual ques that cause the mind to make the connection.

“ADVERTISEMENT”

The Geek Vape Blade body isn’t anything unusual, other than its ability to house a pair of 18650 or 2X700 cells. The term “ergonomic” is way over used when describing vape mods these days, and although the terms works here, it’s not so ergonomic that it grips the hand with natural folds and curves but handling it you’ll notice a semi-soft curvature to the mod that makes it comfortable. The large, front panel fire button doesn’t exactly make the case for true ergonomics, but then again, it doesn’t take but a minute to get used to it if you come from a previous side-panel fire button, or a full-length fire panel that adorns most of the SMOK Vape Mods.

 

The chassis was designed to accommodate dual 20700 and 21700 batteries and an option of a pair of 18650 batteries with the included adapter (batteries sold separately).

 

The AS Chipsetis exceedingly accurate, providing a true maximum wattage output of 235W, as well as several advanced modes like; Power Wattage, VPC, TC-TCR, as well as a BYPASS Mode.

The Blade Starter Kit includes the Aero Sub-Ohm Tank, which is a 25mm atomizer with a capacity of 4mL. It has an appropriate “threaded” top cap top-fill design, and its top performance comes from using the IM Coil System.

 

So far, I’m enjoying the Geek Vape Blade Starter Kitand I can see myself putting it into my “vape mod rotation”, if the performance continues to be as good as it is this first hour.

Greek Vape Blade Preview Wrap Up

I’m going to spend a week with the Blade and I’ll spend time using the Aero Sub-Ohm Tank, it’s two coils, as well as some of the Sub-Ohms I’ve been using in my personal vaping life, such as the Prince, the Baby Prince, the Uwell Valyrian, and a handful of others. After which I’ll publish the review. Things look promising now, but you never what can happen with a lot of heavy vaping over the next week.

Specs and Contents for the Geek Vape Blade

Geek Vape Blade 235W TC Box Mod Features:

  • Geek Vape Blade Features:
  • AS Chip Set
  • 5 to 235W Output
  • 0.05 to 3.0-ohm Atomizer Resistance Range
  • 6.2 to 8.4 Voltage Range
  • Power Support
  • VPC Support
  • BYPASS Mode
  • Temperature Control Suite
  • Ni200 Nickel Support
  • Titanium Support
  • SS316 Support
  • 200 to 500 Degrees Fahrenheit
  • 0.96 Inch Color Display
  • Amp Range
  • Output Power
  • Atomizer Resistance
  • Battery Life Indicator
  • Puff Counter
  • Neatly Displayed
  • Magnetic Battery Panel
  • Accepts Dual High Amperage 18650/20700/21700
  • Batteries Sold Separately
  • (PPS + Fiberglass) + Stainless Steel Construction
  • USB Port
  • Update and Charging Capability
  • Spring Loaded Gold Plated 510 Connection
  • Reverse Polarity Protection/Short Circuit Protection/Low Voltage/Overheat
  • Geek Vape Blade Dimensions:
  • 94.4mm by 52.6mm by 38.5mm

  • Aero Sub-Ohm Tank Features:
  • 25mm Diameter
  • Quarter Turn Top Fill System
  • 4ml Maximum Capacity
  • IM Coil Family
  • IM1
  • 0.4 ohm
  • Ka1
  • Vertical Coil
  • 40 to 60W
  • IM4
  • 0.15 ohm
  • Ni80
  • Vertical Coil
  • 60 to 80W
  • Dual Adjustable Bottom Airflow System
  • 9mm by 2mm Each Air slot
  • Fully Closeable

Geek Vape Blade Kit Includes:

  • One Geek Vape Blade Mod
  • One Aero Sub-Ohm Tank
  • One IM1 0.4-ohm Coil (Pre-installed)
  • One IM4 0.15-ohm Coil
  • One Spare Silica Glass
  • One 18650 Adapter
  • One USB Cable
  • Spare Parts Pack
  • User Manual