Last Updated on December 23, 2019 by Team Spinfuel

The Squonk Mod has been around for years. In the early days most people called them Bottom Feeders, though the last few years they’ve taken on a better, more descriptive name; Squonks. A squonk mod is a vape mod that includes a built-in squeeze bottle used for feeding e-liquid into an BF-atomizer, usually a rebuildable dripping atomizer (BF-RDA), up through the 510-connection. A squonk mod eliminates the need for dripping, and instead uses the bottle as the tank section for your atomizer. Below are the best Squonk Mods or Kits that appeared on vendor shelves in 2018.

Best Squonk Mod or Kit

1st Place Winner - DOVPO X TVC TOPSIDE 90W Squonk

2018 Best Squonk Mod

DOVPO X TVCThe DOVPO X TVC TOPSIDE Squonk Mod clicked with Vapers that prefer squonkers in a BIG way. Vendors reported not being able to keep up with the demand when it was first released. Of all the new, 2018 Squonk Mods, the Dovpo x TVC Topside deserves its place as Best Squonk of 2018.

Spinfuel VAPE Review

The DOVPO Topside 90W Squonk Mod is made in collaboration with The Vapor Chronicles, deploying the first top-fill squonk mod  design with 10mL max capacity, single 21700 platform, and an intelligent chipset with BYPASS and optional Temperature Control. The DOVPO Topside 90W is created from Zinc Alloy and Aluminum Alloy to make it moderately impact-resistant in an ergonomic shape, with parts that have contact with eLiquid are made from food-grade Stainless Steel and silicone. The Topside has a single battery bay for a high-amp 21700 battery (sold separately) while leaving space for a 10mL squonk bottle adjacent for today’s popular eJuice. Within the unit, the squonk bottle can be filled from the top, after unscrewing a knurled and threaded top cap. The squonking action on the Topside Box mod is found opposite of the firing button and display face and is made from food-grade silicone for a truly unique design. The leak-resistant 510 base is useful that it will not allow juice within the internals. Furthermore, the 510 base is gold-plated and spring-loaded for the best possible conductivity.

DOVPO Topside 90W Squonk Bod Mod Features:

  • Dimensions – 92mm by 54mm by 27mm
  • Collaboration with The Vapor Chronicles – TVCreation
  • Single High-Amp 21700 Battery – Not Included
  • 10mL Silicone Squonk Bottle
  • Wattage Output Range: 5-90W
  • Voltage Output Range: 1.0-8.5V
  • Resistance Range: 0.08-3.5ohm
  • Temperature Control Functionality (Firmware Upgrades Require)
  • Supports Ni200, Titanium, Stainless Steel Compatibility
  • BYPASS Mode
  • Stainless Steel, Zinc, & Aluminum Alloy Construction
  • Intuitive 0.96″ OLED Display Screen
  • Circle Firing Button
  • Two Adjustment Buttons
  • Unique Top-Fill Method – Convenient Squonk Bottle Refill
  • Bottom-Loaded Hinged Battery Cover
  • MicroUSB Port
  • Leak-Resistant 510 Base
  • Spring-Loaded 510 Connection
  • Available in Red, Black, Silver, Gunmetal, Blue, Purple


  • 1 Topside 90W Squonk Mod
  • 2 10mL Squonk Bottle
  • 1 MicroUSB Cable
  • 1 18650 Adapter
  • 1 Instructional Manual

The Nominees



SNOWWOLF O-100 100W SQUONKThe SnowWolf O-100 100W Squonk Starter Kit is the latest advanced squonk kit with luxurious design elements, featuring performance versatility with full temperature control suite and a 7mL capacity squonker bottle. The SnowWolf O-100 Squonk Box Mod is sturdily constructed with heavy-duty Zinc Alloy frame with magnetized panels in a range of visually striking designs. The internal chipset of the SnowWolf O-100 can be fired up to 100W with POWER Mode adjustment and compatible with Kanthal, Ni200, Ti, and Stainless Steel wires with TCR Adjustments and Memory Mode. Furthermore, the 7mL squonk bottle can be filled with today’s popular vape juice and can be used to saturate the cotton within the included SnowWolf BF RDA via a bottom-fed 510 squonk pin. The SnowWolf BF RDA measures a 24mm base and has a two-post deck with single terminal in each for a flavor-focused single coil configuration. Airflow enters via large adjustable dual airflows that can fully open for maximum customizability or with the provided tiny airslots for a MTL-orientated air channel.

Spinfuel VAPE Review

Due to the nature of manufacturing, design, and unique resin elements, each SnowWolf O-100 Resin features a unique colorway and patterning. Photos are for reference only.

SnowWolf O-100 100W Squonk Box Mod Features:

  • Dimensions – 83mm by 54.5mm by 28.4mm
  • Single High-Amp 21700/20700 Battery – Not Included
  • Optional Single 18650 Battery – Adapter Included
  • Wattage Output Range: 10-100W
  • Voltage Output Range: 1-7.5V
  • Max Output Current: 25A
  • Atomizer Resistance Range: 0.05-3.0ohm
  • Temperature Control Range: 212-572F
  • Kanthal, Ni200, Ti, Stainless Steel (304/316/317) Compatibility
  • TCR Adjustments
  • POWER Mode
  • Sturdy Zinc Alloy Frame Construction
  • Resin Dyed Panel – Fully Interchangeable
  • Visually Striking SnowWolf Engravings
  • Magnetized Battery Panel
  • Intuitive OLED Screen
  • Oversized Firing Button
  • Two Adjustment Buttons
  • No Atomizer Protection
  • Atomizer Short Protection
  • Hugh Temperature Protection
  • MicroUSB Port
  • 510 Connection
  • Available in Full Gold Edition – Azure, Blossom, Red Prism, Black Prism

SnowWolf BF 24mm RDA Features:

  • 24mm Base Diameter
  • Super Stainless Steel Construction
  • Two-Post, Single Terminal Design
  • 2mm Terminal Openings
  • Large Build Area for Specialty Coil
  • Single Coil Configuration
  • PEEK Insulator
  • 7mm Deep Juice Well
  • Dual Adjustable Airflow Control – Multi-Airhole Adjustments
  • 8mm by 2mm Each Airslots
  • 810 Cobra Resin Widebore Drip Tip
  • Two Concave Juice Wells – Suitable for Squonking
  • Gold-Plated Squonk BF 510 Connection


  • 1 O-100 Squonk Box Mod
  • 1 SnowWolf BF RDA
  • 2 Prebuilt Coils
  • 1 Allen Key
  • 1 Spare Parts Bag



Aleader BHive Squonk ModAleader Bhive Squonk BF 100W Starter Kit is optimized for builders looking for a portable squonk system, integrating a 100W maximum chipset powered by a single 18650 battery to pair with the squonk-ready BF Bhive RDA. The body is constructed from a sturdy resin and zinc alloy combination, featuring a resinous panel that is great at dispelling heat. The Bhive Squonk 100W Kit is great for filling on the go as it comes with a squonker pin and 7mL squonk bottle that can be used as a reservoir for extra eJuice. The Bhive Squonk 100W Starter Kit comes with the Aleader Bhive 24mm RDA, featuring a spacious build deck, bottom-fed squonk gold-plated 510 connection, and a simple but effective airflow system. The build deck plays host to two posts with two terminals each – top secured via Allen screws. The coil leads are fastened into them and hang above the airflow outlet which draws airflow from the side airslots measuring in at 9mm by 3mm which produce massive clouds and intense flavor. The 510 connection is squonk ready and gold-plated to ensure the best conductivity.

Spinfuel VAPE Review

United Society of Vape USV Mach ON3 Squonker


USV MACH ON3The USV MACH ON3 240W Squonker Starter Kit is a great mod with plenty of capabilities, featuring the advanced VO TECH 240W Chipset, a full range of temperature control options, and a 8.0mL squonking bottle. The USV MACH ONE Box Mod is technologically advanced, using the VO TECH 240W chipset to unlock the potential to fire at a whopping 240W, an extremely high wattage reserved for only the most advanced vaping devicies. Powered by dual 18650 (sold separately), the MACH ON3 can utilize the extensive temperature control suite, supporting NiChrome, Titanium, and Stainless Steel wire options. The included 8.0mL squonking bottle sits alongside the battery bay, saving crucial space within the design for ergonomic purposes and provide support with today’s top squonk BF RDAs.

Spinfuel VAPE Review

USV MACH ON3 240W Squonker Box Mod Features:

  • Weight – 453g
  • 8mL Capacity Squonk Bottle
  • Dual High-Amp 18650 Batteries – Not Included
  • VO TECH 240W Chipset
  • Wattage Output Range: 5-240W
  • Voltage Output Range: 1V-8.4V
  • Resistance Supported: 0.1-2.0ohm,
  • Temperature Control Range: 93°-315°C / 200°-600°F
  • Extensive Temperature Control Suite
  • Ni200, Ti, Stainless Steel Compatibility
  • Zinc-Aluminium Alloy Chassis Construction
  • Carbon Fiber Accents
  • 1.3″ TFT Colored Screen
  • Intuitive Firing Button
  • Beveled Edges
  • Two Adjustment Buttons
  • Locking Bottom Hinged Battery Door
  • Customizable User Interface
  • Low/High Voltage Protection
  • Low/High Amperage Protection
  • Short Circuit Protection
  • Low/High Resistance Protection
  • High PCB Temperature Protection
  • MicroUSB Charging Port
  • Spring-Loaded Squonk BF Pin


  • 25mm Diameter
  • Superior Stainless Steel Construction
  • Spacious Build Deck
  • Two-Post, Single Terminal Design
  • 3mm Terminal Post Openings
  • Top-Secured via Knurled Slotted Screws
  • Single or Dual Coil Configurations
  • Dual Three-Slotted Side Airflow Control
  • ULTEM Widebore Drip Tip
  • Squonk BF 510 Pin
  • Gold-Plated 510 Connection

Package Includes:

  • 1 USV Mach On3 240W Box Mod
  • 1 Mach On3 RDA
  • 1 8mL Squonk Bottle
  • 1 Spare Parts and Tools
  • 1 MicroUSB Cable
  • 1 User Manual
  • 1 Warranty Card

iJoy Capo Squonk 100W


iJOY Capo Squonk 100W 21700 Mod Kit Preview by Spinfuel VAPEProbably one of the most well known Squonk Mods this year, the iJoy Capo 100W Squonk Mod does all its supposed to do with style and grace. One of favorites, and a nominee in this years Best Vape Gear Awards

Spinfuel VAPE Review

The iJoy CAPO Squonker 100W Starter Kit caters to a rebuildable builder’s dream, deploying a versatile bottom-feeding COMBO RDA with the 21700/20700 platform of the CAPO Squonk 100W Box Mod. The CAPO Squonker Box Mod is constructed to fully accommodate the new iJoy 21700 3750 40A Battery (not included), with the option of using 20700 battery (not included) to provide a versatile, long-lasting device with phenomenal performance capability. The battery is top-loaded through a threaded battery cap, with the squonk-readysection located adjacent for ergonomic control while simultaneously catering to building enthusiast. The internal chipset features a maximum output rating of 100W with effective fine-tuning adjustments.

The iJoy COMBO Triangle RDA delivers a user-friendly two-post, dual terminal design with triangular orientation along with bottom airflow and the introduction of a full-ULTEM exterior structure. Measuring 25mm in diameter, the COMBO RDA presents a 3-piece structure with 24K gold-plated base, ULTEM drip tip, and high-quality Stainless Steel or ULTEM wall sleeve. Airflow is cleverly implemented onto the base section with dual etched cutouts where air channels enters the structure and adjusted via knurled top cap.

iJoy CAPO Squonk 100W Box Mod Features:

  • Single 21700 High-Amp Battery – Not Included
  • Single 20700 High-Amp Battery – Not Included
  • Single 18650 High-Amp Battery – Requires Battery Adapter
  • Maximum Wattage Ouput: 100W
  • Minimum Atomizer Resistance: 0.05ohm
  • Intuitive OLED Display
  • Oversized Rectangular Firing Mechanism
  • Adjustment Buttons Below Screen
  • Top-Loaded Threaded Battery Cap
  • Squonk-Ready Bottom-Feeding Section
  • Short Circuit Protection
  • Overcurrent Protection
  • Overvoltage Protection
  • Overcharge Protection
  • MicroUSB Port – Firmware Upgrades
  • Spring-Loaded Stainless Steel 510 Connection

iJoy COMBO Triangle RDA Features:

  • 25mm Diameter
  • 9mm Deep Juice Well
  • Superior Stainless Steel Construction
  • Gold-Plated Two-Post, Dual Terminal Design – Triangular Design
  • 3mm by 3mm Terminal Openings
  • PEEK Insulators
  • Dual Slotted Side Airflow Control – 10mm by 2.5 per Airslot
  • Dual Bottom Vortex Airflow – Angled at 45 Degrees
  • 9mm 810 ULTEM Widebore Drip Tip
  • Gold-Plated 510 Connection


  • 1 CAPO Squonker 100W Mod
  • 1 Combo Triangle RDA
  • 1 Squonk Bottle
  • 2 Prebuilt Coils
  • 1 18650 Battery Adapter
  • 1 MicroUSB Cable
  • Spare Parts
  • Instructional Manual