Ozone Smoke Review
https://www.youtube.com/watch?v=zuo_Lvq8Iuk
Hey Folks, SmokenJoey here. Tonight I have a comprehensive review of the Ozone Smoke Starter Kit. Priced at $69.99 the Ozone Smoke gets a thumbs up. Passes the SmokenJoey battery test, outputs quite a bit of vapor, and the extra long cartomizers last quite a while. Nicotine levels were a bit of a disappointment though, topping out at 16mg, or 1.6%. Ozone uses the zero, light, medium, and full for nicotine designations.
Let me know what you think below in the comments.
Premium Kit Includes:
- 1 Regular Rechargeable Lithium Ion Battery
- 1 Short Rechargeable Lithium Ion Battery
- 6 New Long Lasting Cartridges (Variety Pack Medium)*
- 1 Wall Adapter
- 1 USB Charger
- 1 User’s Manual
- 1 Year Warranty
Now to wrap. I’ve used two methods so far. Free hand and a drill bit. Free hand is simple. Once your wick is in the hole just start at the base. You will need to hold one end down with your finger while bringing the wire around the negative screw and wick. Hold a little tension on the wire as you screw down the negative. This will free up that hand. Now I just wrap the coil on the wick going counter clockwise up the wick. Depending on whatever gauge your using determines your wraps. With 32 I make 4 or 5 giving a 1.4 to 1.7 ohm coil. Once you’re at the top I wrap it around the positive post and run the nut down. After your top nut is down space the coils evenly. To use a drill bit find whatever size fits into the wickhole. You will want the biggest that will go into it. Now just wrap your wire around the smooth part of the bit. Your wrap count should be the same. Once its wrapped insert the bit into the wick hole threads down. Attach your positive and negative.
