The iJoy RDTA Box 200W Starter Kit ($59.95 Element Vape) and the SMOK Skyhook RDTA Box, share many similarities, at first glance anyway, but there are differences that could very well leave room in the marketplace for both devices to prosper. In this review, I’ll discuss the iJoy RDTA Box and soon follow up on a review of the SMOK Skyhook RDTA Box.

I’ve spent the better part of the past 3 weeks using both, and enjoying both. (The review for the Skyhook should be published soon.)

The iJoy RDTA Box 200W Starter Kit is a beautifully designed box mod, built in collaboration with VapingwithTwisted420, measuring 55mm by 28mm by 135mm, or 2.1 inches wide, just 1 inch deep, and 5.3 inches tall… It features a massive 12.8mL eliquid tank across the top part of the chassis. It is ridiculously easy to refill with its 15mm wide refill slot that’s covered with a screw on, screw off cap. 15mm will allow the user to unscrew the cap and literally pour the ejuice into the tank area of the device, along with a built-in LED light for e-juice gauging and cleaning.

The iJoy RDTA Box is a dual 18650 high-amp battery mod, with an easy-to -access battery compartment.  The 200W of maximum output is due to the iJoy’s IWEPAL chipset technology (with a 95% Power Efficiency rating) that can bring 200W of power to the table with just two 18650 batteries, plus a full suite of Temperature Control tools with support for Ni200 Nickel, Titanium, and Stainless Steel heating elements. The wattage output range is 5 to 200W, and the resistance range is, well, how low can you build a coil?

With four output modes, full temperature control support, and a 0.96-inch OLED screen on the front side, the iJoy RDTA has everything a user could want, if that user prefers to use a build deck instead of replacing pre-made coil heads.

This iJoy RDTA Box, as well as the SMOK Skyhook, combines the best of all worlds by giving the user a huge amount of eliquid capacity, easy access to a dual 18650 battery compartment, 200W and 220 watts respectively, of maximum wattage output, and full temp control. Last but not least, the iJoy RDTA Box is firmware upgradable.

With the iJoy IMC Interchangeable Deck system for the iJoy RTDA the user is offered a plethora of interchangeable build decks, (eleven in total) and no matter what coil(s) the user wants to build it’s available by adding one of the optional decks to the collection. (decks sold separately)

The iJoy RDTA Box includes a two-post IMC3 deck, a versatile build deck and an included IMC Coil. Rated at 0.15Ω, this pre-built coil has a wattage range of 50 to 100W. The Kit even includes some high grade organic cotton. But that’s just to get the user started. CLICK FOR LARGER IMAGE

The iJoy RDTA Box is the new flagship of iJoy, with very good reason. The RDTA Box features a new IWEPAL powered chipset capable of 5 to 200W of output across four output modes, full temperature control support, and a vertically orientated 0.96-inch OLED screen. The device is powered by dual high-amp 18650 batteries (sold separately) loaded from the sliding battery door located at the side of the chassis.

For a full list of features and specifications, look below. Between the iJoy RDTA and the SMOK Skyhook, this format is quite spectacular for Vapers looking for a smooth transition between Sub-Ohm tanks and RDA’s, or for experienced RDA users looking for modern box mod features for their RDA experience.

Real World Report

For months now I’ve been using only Sub-Ohm tanks, and seldom even bother with the RBA head some of the better tanks include. When you can spend your vape time with a tank like the TFV8 Cloud Beast or the TFV12 Cloud Beast King, there isn’t a lot of reasons to bother with an RDTA setup, except for one; there are tens of thousands of Vapers that love building their own coils. For them, the iJoy RDTA Box brings all the great things we love about our modern box mods, plus a huge eliquid tank like a good Squonker, right up to the Coil Builder’s front door. All of this for just $59.95, in several color choices too.

The iJoy RDTA Box is truly a dream machine for Coil Builders/RDA users, and in the amount of time I spend with it I learned to enjoy coil building again. I won’t abandon my box mods and sub-ohm tanks, but for those times when I want to try a cool new build, this machine is going to get my undivided attention.

Using the included deck with the iJoy Limitless RDA, I stuffed the RDA will the supplied organic cotton, saturated the coil and cotton with a 70% VG eliquid and enjoyed pure flavor and immense clouds of vapor and remembered why vaping with an RDA was always magnificent.

Grade: A+

“The iJoy RDTA Box deserves an A grade just as it is, but considering the 10 other optional build decks

and pre-made coil options, it becomes obvious that iJoy wants to bring fancy coil building to the modern world of sophisticated box mods and box mod users. Temperature Control, Variable Wattage, 12.8mL juice capacity, and 200W to play with, this is a Box I would happily recommend to any RDA user or anyone interested in learning how to build coils and use an RDA. Great job iJoy!”

Good value, easy to use, and feature loaded, the iJoy RDTA Box is one of the best devices for Coil Builders to hit the market in a long, long time.

Tom McBride

Available Now at Element Vape

iJoy RDTA Box Features:

• 5 to 200W Output
  • Hard
  • Normal
  • Soft
  • User
    • Customized Working Waveband
  • 0.05 to 3.0Ω Minimum Atomizer Resistance
  • 1 to 9V Output
  • 1 to 45A Output
  • Four Setting Output Mode
  • Firmware Upgradeable
  • 95% Power Efficiency
• Temperature Control Suite
  • Ni200 Nickel Support
  • Titanium Support
  • Stainless Steel Support
  • Adjustable Initial Resistance
  • 300 to 600 Degrees Fahrenheit Output Range
  • 0.06 to 3.0Ω Atomizer Resistance Range
• 0.96″ OLED Screen
  • Vertically Stacked Matrix
  • Output Wattage and Temperature
  • Output Voltage
  • Mode and Heating Element
  • Atomizer Resistance
  • Output Current
  • Battery Life Indicator
  • Rotating Screen
  • Atomizer Resistance
  • LED Light Set
• Sliding Battery Door
  • Sold Separately
  • Dual 18650 Battery Powered
• Integrated Combo RDTA Platform
  • IMC3 Deck (Preinstalled)
    • Dual Terminal Per Post
    • 2.5mm Diameter per Terminal
    • Side Mounted Phillips Screws
    • Sidewall Cutouts
    • Two Post
    • Dual Coil Compatible
    • Quad Wicking Ports
  • IMC Coil 0.15Ω
    • Prebuilt Sub-Ohm Coil
    • Ceramic Deck
    • 50 to 100W
    • Organic Cotton Wicking
  • IMC Interchangeable Build Deck System
• Full Range Tank Reservoir
  • Dedicated Threaded Fill Port
  • 15mm Diameter
  • Pour to Fill
  • 12.8ml Tank Capacity
  • Top Fill Design
• Dual Adjustable Airflow
  • 15mm by 1.5mm Each Air slot
  • 10mm Wide Bore Drip Tip
• Stainless Steel 510 Connector
  • Spring Loaded Brass 510 Pin
• PCB Temp/Low Battery/Atomizer Short/Low Resistance Protection

iJoy RDTA Box Kit Includes:

• One iJoy RDTA Box
• One IMC3 Deck
• One IMC Coil 0.15 ohm
• One Silicone Cap Cover
• One Silicone RDTA Plug
• One Phillips Screwdriver
• One Hard Bristle Nylon Brush
• Two Prebuilt Fused Clapton Coils
• Two Strips of Organic Cotton
• Spare Parts Pack
• Micro USB Cable
• User Manual