Table of Contents
High-Quality CBD Products has been growing in popularity for some time now and is only expected to grow further. While it’s mostly good news for CBD enthusiasts, as it means the offer will only widen, it also leads to the appearance of low-quality, cheaper products and decreased popularity of the trustworthy CBD companies.
If you’re not too knowledgeable about cannabidiol, you might have some trouble determining what you should buy and what to avoid. This is why we have decided to help you a little so that you can start enjoying the benefits of CBD earlier without completely immersing yourself in the subject.
In this article, you will find some useful tips for choosing high-quality CBD products of the highest quality and learn what you should pay attention to. For example, find out how the CBD oil is extracted from the plant, whether there are any third-party testing reports or any additives in the final product, or check if it is full spectrum. Read on and educate yourself on the topic.
What Does It Consist Of?
When it comes to cannabis, the growing conditions are most important. This is because marijuana plants that were grown in the wild or in a controlled environment have different chemical compositions. For example, fresh or cured cannabis has more CBD, while CBN is usually present in high quantities in older cannabis.
The full spectrum CBD oils and drops, such as Thryv Organics CBD products, contain a whole range of cannabinoids, terpenes, and flavonoids. It’s much more effective than CBD oil that is made with just one cannabinoid. It’s also better for your health as it helps maintain the balance of your body’s endocannabinoid system.
What Is the Extraction Method?
CBD oil can be extracted using several methods. Generally speaking, there are several of them: CO2 extraction, solvent extraction, steam distillation, and cold pressure extraction – among others. While the first is considered to be the most effective and safe method, it’s also quite expensive.
CO2 extraction is used when a full spectrum extract is needed from hemp or cannabis. It uses pressurized CO2 to extract the desired compounds from plants. The drawback here is that CO2 extraction requires a large amount of time (about 6 hours) and money ($250 or more).
Solvent extraction is the most commonly used method of CBD extraction, as it’s cheap and fast. It takes about an hour to finish the process and costs $100-$150 per batch. However, solvent extraction is also harmful to your health as it can result in residues in the final product.
Steam distillation is another low-cost alternative, but it also takes a lot of time to finish the process (6 hours minimum), and the end product is not always up to standard.
The steam rises through the cannabis or hemp flowers, causing the cannabinoids to vaporize. This creates a relatively pure extract, which is then cooled down, purified, and packaged.
Cold pressure extraction is considered to be a new kid on the block, as it’s only recently become popular. It’s a good option if you want to get a CBD extract from hemp flowers or cannabis leaves and stems. It uses supercritical carbon dioxide to extract the desired compounds from plant materials.
The process does not involve any chemicals or solvents, which makes it safe for consumption. Cold pressure extraction requires roughly 3 hours to perform and costs $175-$250 per batch in its standard version. However, this process results in a lower yield.
Third-Party Testing Reports?
Another thing you should check out when choosing a CBD product is third-party testing reports. The best products are those that come with third-party lab testing results, which include:
- certificate of analysis from a designated lab showing the exact tests performed on the product;
- a statement that they contain a certain amount of CBD (the percentage amount of cannabidiol) by volume
- Information whether it contains any other additives;
- results and any test data generated during testing.
This list should also include where the product was sourced from (if it’s hemp or marijuana), whether it’s a full spectrum or an isolate, and so on. Such third-party lab reports are essential since they provide proof that your product really contains what it claims to contain.
Final Note
These are some of the most important tips for choosing high-quality CBD products. While the CBD industry is quite new and still developing, it is becoming more regulated with time. However, it doesn’t mean that you should trust any CBD manufacturer out there.
Always make sure that you choose a product that:
- comes with third party testing reports
- is extracted using CO2 extraction or cold pressure extraction,
- and doesn’t include herbicides, heavy metals, or other contaminants that might affect your health negatively.
Further Reading:
CBD Products – 9 Key Considerations When Shopping For Them
Everything You Need to Know About CBD Gummies
How Effective is CBD and What is Mostly Used for?
5 Things You Should Know About Using Prescription-Free CBD Products
