Sporting a very similar chassis design of its bigger brother, the beautiful SMOK X-PRIV Starter Kit (reviewed here), the SMOK X-PRIV Baby Starter Kit offers all the internal features with much less power and a decent 2300mAh internal battery. At just over $50 at Element Vape, this X-PRIV Baby includes the TFV12 Big Baby Prince (6mL juice capacity). All in all, for Vapers that don’t mind internal batteries and loved the look of the larger X-PRIV and Full-Size Prince Sub-Ohm Tank, the X-PRIV Baby is the best value SMOK has going on right now. At least that’s how this reviewer sees it. Let’s dig deeper and find out if the X-PRIV Baby Starter Kit is right for you.

The SMOK X-PRIV Baby maxes out at 80 watts, plenty of power to push out optimal vaping with the included Big Baby Prince and its two low-wattage TFV8 Baby Coils, the 0.4-ohm TF8 Baby-Q2, rated for 40-80W, with an optimal vape at 55-60W. During the review process I was actually surprised at just how good the Q2 coils performed with this sophisticated mod.

 

The SMOK X-PRIV Baby utilizes a large hi-res 2-inch display, with full-color HD resolution. The X-PRIV Baby’s 2300mAh internal battery delivers about 5 hours of moderate vaping while using the Big Baby Prince and the Q2 coils. Requiring less power, the Q2 will allow uses more vape time and consume less e-juice than a larger full-size Prince and coils requiring much more power.

 

In addition to outputting the full 80W, the X-PRIV Baby includes the latest chipset for a solid and accurate temperature control mode. However, in order to take advantage of temperature control/sensing the user will need to purchase the V8 Baby RBA and build coils with Ni 200, Titanium, or Stainless Steel. All the prebuild coils listed below use a heating element made with Kanthal, which is not suitable for Temperature Control Systems.

 

Note* While the X-PRIV Baby includes the Big Baby Prince, these coils can also be used with the sub-ohm tank to further customize the vape experience. I would definitely recommend trying out the new Baby Strip, 60-80W range, and the Baby Mesh for intense flavor.

V8 Baby-Q2 Dual Core

• Dual Coil Design
• 0.4ohm rated for 40-80W, recommended 55-65W
• 0.6ohm rated for 20-50W, recommended 30-40W

 

V8 Baby-M2 Dual Core

 

• Dual Coil Design
• Compatible with 3.7V Mechanical Mod
• 0.3ohm rated for 25-45W, recommended 35W

 

V8 Baby-X4 Quadruple Core

• Quad Coil Design
• 0.15ohm rated for 30-70W, recommended 45-60W

 

V8 Baby-T6 Sextuple Core

 

• Sextuple Coil Design
• 0.2ohm rated 40-130W, recommended 70-90W

 

V8 Baby-T8 Octuple Core

 

• Octuple Coil Design
• 0.15ohm rated for 50-110W, recommended 60-80W

 

V8 Baby-T12 Duodecuple Core

• Duodecuple Core
• 0.15ohm rated for 50-90W, recommended 60-80W

 

V8 Baby-T12 Duodecuple Core – Light-Up Series

• Duodecuple Core
• LED Lights – Red, Green, Orange
• 0.15ohm rated for 50-90W, recommended 60-80W

 

V8 Baby Mesh

 

• Mesh Core – Faster Heating Process
• 0.15ohm rated for 40-80W, recommended 60-70W

 

V8 Baby RBA Head

• Two-Post Design – 0.3ohm Clapton
• Fe-Cr and Nickel-Nichromium Heating Material
• Includes TFV8 Baby Beast RBA Glass Tube, Screwdriver, and Spare Parts

 

V8 Baby Strip

• 0.15ohm rated for 40-100W, recommended 60-80W

Pairing with the device is the TFV12 Big Baby Prince Tank, implementing a maximum capacity of 6 milliliters, new button-lock hinged top-fill, smooth dual bottom airflow control, and the utilization of the TFV8 Baby Coil System.

Please Note*: The TFV12 Big Baby Prince does not accommodate the TFV12 Prince Coils. It utilizes similar atomizer structure as the TFV8 Baby.

 

Buy these coils at Element Vape

TFV8 Baby Replacement Coils

For Vapers that don’t need a high-wattage mod or demanding sub-ohm tanks, the X-PRIV Baby Starter Kit has a lot to offer. It’s one of the best-looking kits made by SMOK, and has worked faithfully for me since I received almost 3 months ago.

There are literally hundreds of vape starter kits on the market and making the right decision on which one to spend your hard-earned money can be confusing and difficult. Make the wrong decision and you’ve wasted your money. Make the right decision and you’re a happy Vaper. So, is the X-PRIV Baby Starter Kit right for you? Ask yourself these questions and your decision will be made:

• 1: Is 80 watts enough? Add 1 point
• 2: Do you use Temperature Control features – subtract half a point (you’ll need an RDA or the RBA for the Big Baby Prince

3. Do the images in this review leave you with a positive impression on the design of the mod and tank? Add 1 point
4. Does a large hi-res display appeal to you? Add 1 point.
5. Does spending $55 for an 80W mod and 6mL Sub-Ohm tank work for you? Add 1 point

Personally, I have recommended this Starter Kit to several friends, and no one has complained. Then again, these friends are mid-wattage vapers with limited budgets, friends that don’t need to own the high-end gear many others want.

 

Score: A