Kanger has been on a roll, producing some amazing hardware. While some of their stuff, like their SubTank Mini, has been copied by many other companies, they manage to stay at the top of the list in innovation, quality, and design. With the KBOX 120W TC and KBOX 200W TC, Kanger is expanding their temperature control range and offering higher wattage devices for vapers who need more power. We got our hands on the KBOX 120W TC and the KBOX 200W TC from VapingZone and have been testing them out for the past couple of weeks.
KBOX 120W TC Specs
Requires 2 x 18650 batteries (Sold Separately)
Output 7W – 120W
Temperature Range: 200°F – 600°F / 100°C – 300°C
Supports Nickel, Titanium, Stainless Steel, Nichrome, and Kanthal Wire
Resistance Range: 0.05Ω – 2.5Ω
Spring-loaded 510 Pin
Magnetic Battery Cover
USB Charging Port
OLED Screen
Short Circuit Protection
Overcurrent Protection
Reverse Battery Protection
Low Resistance Protection
Low Voltage Protection
Over-temperature Protection
10-second Cut-off
Dimensions: 84mm x 56mm x 22mm
KBOX 200W TC Specs
Requires 2 x 18650 batteries (Sold Separately)
Output 7W – 200W
Temperature Range: 200°F – 600°F / 100°C – 300°C
Supports Nickel, Titanium, Stainless Steel, Nichrome, and Kanthal Wire
Resistance Range: 0.05Ω – 2.5Ω
Spring-loaded 510 Pin
Magnetic Battery Cover
USB Charging Port
OLED Screen
Short Circuit Protection
Overcurrent Protection
Reverse Battery Protection
Low Resistance Protection
Low Voltage Protection
Over-temperature Protection
10-second Cut-off
Dimensions: 84mm x 56mm x 22mm
What’s in the Box
1x KBOX 120W TC or KBOX 200W TC Mod
1x User Manual
Performance
Both devices are identical with the exception of the 120W vs 200W output, and both performed identically. Therefore, the information you read in this section applies to both devices. The KBOX 120W TC and KBOX 200W TC feel pretty solid in the hand; they have some weight to them, but not too much. The finish is a satin black, which is nice because it doesn’t seem to scratch easily.
The firing button is large and tactile, and the adjustment buttons are positioned right below the screen. The OLED screen is bright and easy to read. It displays the wattage, temperature (when in TC mode), resistance, and battery life indicator. It does require two 18650 batteries, which are easily accessed through the magnetic battery cover on the back.
There is a USB port on the front of the device, which is mainly for firmware upgrades and not really for charging. There isn’t a whole lot of information on this, but like the Evic VTC Mini, it’s most likely only for firmware upgrades and emergency charging. I wouldn’t recommend continuously charging your batteries through the USB port. There are vent holes on the bottom of the device, so you won’t have to worry about your batteries venting if something were to happen.
Temperature Control Mode
In order to enter Temperature Control mode, you just press the firing button three times, and then use the adjustment buttons to select the wire type you’re using. After you select the wire type, you then use the adjustment buttons to select your desired temperature. The KBOX 120W TC and KBOX 200W TC supports Nickel, Titanium, Stainless Steel, Nichrome, and Kanthal wire. This is great, as not all TC devices support all types of wire. Once you have everything set, it’s time to vape.
I started off with my Arctic tank with a 0.2Ω Ni200 coil. I set the KBOX 120W TC to 450°F and took a vape. The vapor production and flavor were both on point. I then moved on to my Uwell Crown tank with a 0.25Ω SS coil. I set the KBOX 120W TC to 500°F and took a vape. Again, the vapor production and flavor were both on point. The KBOX 120W TC did an amazing job with both tanks, and I was impressed with its performance in Temperature Control mode.
Next up was the KBOX 200W TC. Since the performance of these devices is nearly identical, I chose to focus on the 200W TC’s ability to handle high-wattage builds. For this test, I used my Tsunami RDA with a dual Clapton build that measured at 0.15Ω. I set the KBOX 200W TC to 550°F and took a vape. This device handled the build like a champ, producing massive clouds and incredible flavor. I was seriously impressed. The ability to support Nichrome and Kanthal in TC mode is a huge plus, giving vapers more flexibility. The Kanger KBOX 120W and 200W TC devices perform exceptionally well in Temperature Control, rivaling even the most expensive TC mods on the market.
Vaping in Wattage Mode
To enter wattage mode, you just press the firing button three times, and then use the adjustment buttons to select wattage mode. After you select wattage mode, you then use the adjustment buttons to select your desired wattage. I started off with my Uwell Crown tank with a 0.5Ω coil. I set the KBOX 120W TC to 70W and took a vape. The vapor production and flavor were both on point. I then moved on to my Sense Herakles tank with a 0.2Ω coil. I set the KBOX 120W TC to 100W and took a vape. Again, the vapor production and flavor were both on point.
Next up was the KBOX 200W TC. I used my Tsunami RDA with a dual Clapton build that measured at 0.15Ω. I set the KBOX 200W TC to 150W and took a vape. This device handled the build like a champ, producing massive clouds and incredible flavor. I gradually increased the wattage to 200W, and the device still performed flawlessly, delivering consistent power. The KBOX 120W and 200W TC devices are powerhouses when it comes to wattage mode, easily handling high-wattage demands without breaking a sweat.
Conclusion
The Kanger KBOX 120W TC and KBOX 200W TC are fantastic devices. They are well-built, perform exceptionally well in both temperature control and wattage modes, and offer great features like support for multiple wire types. Kanger has truly outdone themselves with these devices. If you’re in the market for a high-wattage, reliable, and versatile mod, then either the KBOX 120W TC or KBOX 200W TC would be an excellent choice.
