Innokin iTaste 134 Mini – Here’s What We Know

by


Innokin iTaste 134 Mini Pre-Release Sneak Peek

The iTaste 134 Mini, or the iTaste Mini 134, whatever feels right with you, is due to hit your favorite vendor’s stockrooms by the end of January, just in time for the Chinese Spring Festival to kick it on February 3rd.  An initial shipment will begin to arrive within the next week to 10 days, and we hope to be able to bring you a full review within a week after the official release date.

The iTaste 134 Mini promises to be every bit as good as it’s bigger brother, the massive (but massively awesome) Variable Wattage APV, and may actually outdo the standard 134 in performance. Innokin has had a few months to work out the kinks (what little there was) and will undoubtedly utilize what they’ve learned when building the mini version.

For an in-depth look at the iTaste 134 click here to read our review.

Below is what we know about the 134 Mini.

Innokin iTaste Mini 134 Starter Kit Features:

-       Variable Wattage: Wattage can be adjusted from 6.5 – 12.5 W in 1-watts increments.

-       Short Circuit Protection.

-       Reverse Battery Protection Circuit

-       ON/OFF battery switch

-       LED Battery Power Display via ON/OFF Button

-       10 second cut off

-       Compatible with Innokin’s own iClear16, iClear30iClear30S, iClear 30B, CE4, CE5, eGo, T2, T3, VIVI NOVA and other 510-threaded devices, from cartomizers to the most expensive rebuildables.

It weighs 1.5lbs, the dimensions are 7.75” x 5 x 2.5 “, comes in the stainless steel edition and the oh-so-cool black-plated edition. The mini 134 will stand 5 3/4″ tall, with a circumference of 1 1/4″

Like the older and bigger brother it will be constructed with high-grade Stainless Steel.

You’ll have two options for batteries, the 18350 and 18490 battery. The bottom end-cap will adjust for either one. In the past I’ve had much better luck, not to mention the length of the charge, with the 18490, one of the two battery sizes for the ProVape ProVari. The 18490 comes in 1100mAh versus the standard 800mAh of the 18350, so unless you’re looking for the shortest version of the iTaste 134 Mini the 18490 will give you a couple more hours of life between charges.

The iTaste Mini 134 Starter Kit comes with the body, one iClear 30 dual-coil tank, a slightly smaller metal hard case, and the instruction manual in 4 languages. The kit does not include a battery, so make sure you have a couple of properly working batteries already on hand, or better yet, pick up a couple of new ones just to be sure.

Pricing: All we know at this point is that our official supplier, MyVaporStore, and several others will carry the iTaste 134 Mini, and pricing will be somewhat lower than the standard iTaste 134. When we find out what the MSRP will be we’ll update this sneak peek. At this point in time I’m betting it will be right around $129.99, but don’t bet on it.

I don’t know about you but I can’t wait to get mine (in black of course). I use the standard iTaste 134 quite a bit, so a smaller, lighter version is just what the Vape Doctor ordered.

So what do you think? Are you excited about this new Innokin iTaste model? Are you planning on getting one? Speak out in the comments section below!

John Manzione – Publisher